MicroFrame MF-1W Card Frame
|
The MF-1W package includes a single rack unit modular frame and two ± 15 Volt power supply regulators. It is designed to house up to sixteen amplifier modules. This arrangement provides redundant power from a common power transformer and power entry module. The IEC type power entry is a combination input power plug, line filter, and mains voltage selector (120-240 volt 50/60 Hz), allowing all international power cords to be used. The modules are held in place by the anti-vibration card guides and the edge card connector, securing the modules for mobile environments. The MF-1W is finished with a high quality black paint. The modules are held in place by the anti-vibration nylon card guides and the edge card connector, forming a very secure arrangement suitable for mobile environments. The MF-1W uses WECO 3-pin connectors. Price: $1661.00
Audio interconnect may also be left to the end user, as each user has their own preference. Provision is made at the rear of the MF-1 for your choice of multi-pin connectors. A removable flat rear panel allows easy punch and wiring of the multi-pin connectors of your choice. 0.025" sq. posts are provided on the backplane for three ports at each module position. PL-2 pre-connectorized wire assemblies are available. These assemblies consist of a three position Molex® SL housing and pins attached to a two foot length of Gepco #24 solid shielded pair, ready for your multi-pin connector at the rear of the chassis. Alternately, wire wrap connections may be made to the 0.025" posts and attached to the rear panel connectors of your choice. |
