The DA-102 is a stereo distribution amplifier with five
on-board splits per channel. A signal routing switch allows selection of
either input 1, input 2, or both for signal mixing to the outputs. We
normally configure a sixth output at 0 ohms for use with external
build-out panels to furnish many additional outputs. It can also be
reconfigured as a sixth 60 ohm or a 1k ohm mono mix output. The
DA-102 has two sets of front panel 13 segment LEDs, so that you can
simultaneously monitor the left & right outputs. The 13 segment dual
meter plus peak LED gives you the visual cues you need to stay in
control of levels. Plug on accessory daughterboards, such as the RGC-06
remote gain control, add significant versatility to the DA.
- Peak in and out clip points = +27 dBu
- THD = 0.0005% @ 2 kHz, 0.0015% @ 20 kHz
- CMRR > 100 dB to 2 kHz, 75 dB @ 20 kHz
- Bandwidth = 160 kHz, 20 kHz Ø = -14°
- Interchannel Ø difference = 0.5° max, 0.1° typ
- 60 ohm output impedance
- Five stereo on-board outputs
- Gain is variable or precision unity (switchable)
- Dual 13 segment LED meters (DA-102DM only)
- Noise floor = -103 dBu
- 2M ohm balanced stereo inputs
- Crosstalk better than -75 dB at 20 kHz
THD+N and Phase vs. Freq Performance Graph
Larger Image of DA-102DM
